Electric Door Lock: Convenient Way to Secure Your Home!

Compared to traditional deadbolt locks, automatic electric door locks are a convenient way to secure your home. Not only are they convenient, but they can also provide increased security and safety as well. Therefore, it’s important for you to know how to install an electric lock. If you’re looking for someone who can help you with this task, then look no further than Jesuits Locksmith experts. We provide 24hour emergency lock services that are guaranteed to meet your needs and requirements. Here are a few steps on how to install electric locks.

electric door lock - Jesuits Locksmith

How to Install an Electric Door Lock

Before you can begin installing an electric door lock, you need to know what you’re doing.
Make sure you have a good understanding of how door locks work and how they’re attached to the door.

Next, you need to know where to place the electric lock. The electric door lock can be placed on the exterior door or on the interior side wall of the home. When it comes to the exterior door, you can install the door lock on the exterior side of the door, on the interior side of the door, or on the interior side of the door-frame.

If you’re installing the electric lock on the exterior side of the door, you must make sure the door-frame is in good working order. It shouldn’t have any cracks or chips that could cause the lock to malfunction.

When it comes to the interior door, you can install the electric door lock on the interior side of the door, on the exterior side of the door, or on the interior side of the door-frame. Again, you should make sure that the door-frame is in good working order before you begin the installation.

Next, you need to know where to install the electric lock’s controls. This includes the lock’s knob and the button that allows you to open the door. You can place these controls on the interior side of the door, on the exterior side of the door, or on the interior side of the door-frame. When it comes to the exterior side of the door, you can place the controls either on the exterior side of the door or on the interior side of the door-frame.

Plan and Measure

Before you install your electric door lock, you need to make sure you have all the right parts and tools. This includes the door lock, the electric lock’s hardware, and the lock’s key. Next, you need to measure the door’s dimensions using a tape measure. Make sure you carefully write down these measurements so you can reference them later. When it comes to the door’s width, you need to measure from one end of the door to the other.

This includes any sidelights, handles, or other hardware that’s attached to the door. The door’s width will determine the size of the electric lock you can install. Next, you need to measure the door’s thickness. To do this, you must measure from the wall to the center of the door. This includes any trim that’s installed along the door’s edge. The door’s thickness will determine the size of the lock you can install.

Set Up the Lockset

Now that you have all the necessary parts and tools, you can begin installing your electric door lock. First, you need to install the lock’s mounting plate. To do this, you should use the included mounting plate and place it on the door’s surface. Next, you need to attach the lock’s mounting screws. This should be done using the included mounting screwdriver. Make sure you install the screws on the mounting plate so that they’re flush with the plate’s surface.

Connect with the Power Source and Test

Once you have the electric door lock installed, you need to connect it to the power source. This can be done using the included electric lock plug. Next, you need to test the lock’s functionality. To do this, you should turn the lock’s knob and push the lock’s button. If the lock is functioning properly, then you’ll hear a chime or hear a clicking sound when you’re turning the knob or pushing the button.

Electric Door Lock – Install the Hardware

Once you’ve connected the lock to the power source, you need to install the electric door lock’s keyhole cover. To do this, you should use the included keyhole cover and place it over the lock’s keyhole. Next, you need to install a deadbolt’s strike plate. To do this, you should use the included strike plate and place it over the deadbolt’s hole. Contact our professional locksmith Manhattan if you need any assistance.

Final Steps

Once you’ve completed the installation, you should test the lock’s functionality again. This can be done by turning the lock’s knob and pushing the lock’s button. If the lock isn’t functioning properly, you can return to the installation steps and figure out what went wrong. You should also make sure you’ve written down the exact measurements of your door so you can refer to them when you need to. If you have any questions about how to install an electric lock, then contact our professional locksmith Manhattan at Jesuits Locksmith Experts. We’ll be glad to help. We can also install keypad locks. You can get high quality keypad door locks. Call our locksmith Manhattan!

Share this article to friends:

Email
Twitter
LinkedIn
WhatsApp
Facebook
Scroll to top
Skip to content